WLAN Enable On
Press Stop/Exit.
c Turn on your Macintosh.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the desktop.
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. Press Menu, 7, 2, 7. Using a or b, choose On and press OK.

Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only)

Configuration in Ad-hoc mode

Before configuring the wireless settings

IMPORTANT

•The following instructions will install your Brother machine in a network environment using the Brother installer application for Macintosh found on the CD-ROM we have provided with the machine.

•You can also setup your Brother machine using the machine’s control panel which we recommended. See Configuring your machine for a wireless network (For MFC-9320CW)on page 21.

• If you have previously configured the wireless settings of the machine, you must reset the network LAN

5

settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and choose 1 for Yes to accept the change. The machine will restart automatically.

•If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions.

Configure the wireless settings

a b

MFL-Pro Suite icon on your

e Double-click the Utilities icon.

80