To apply the settings, choose Yes. To cancel, choose No.
t
Choose the Encryption type, TKIP or AES using a or b. Press OK. If you have chosen WPA/WPA2-PSKin step l, go to step s.
If you have chosen EAP-FASTin step l, go to step r.
q
WEP:
Apply Settings? 1.Yes 2.No
If you chose Yes, go to step u.
If you chose No, go back to step h.
u The machine starts to connect to the wireless device you have chosen.
v If your wireless device is connected successfully, the display shows Connected for one minute and configuration is completed.
Connected
If the connection failed, the display shows Connection Fail for one minute. See Wireless network troubleshooting (For MFC-9320CW)on page 195.
(Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Install MFL-Pro Suite from the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers and software necessary for operating your device, please choose Start Here OSX from the CD-ROM menu.
Encryption Type?
TKIP
r Enter the user name you wrote down in step a on page 31. Press OK. Go to step s. (To enter text using keypad, see Entering Text on page 229.)
USER:
s Enter the password you wrote down in step a on page 31. Press OK. Go to step t. (To manually enter the text, see Entering Text on page 229.)
PASS:
Press OK. Go to step t. (To enter text
Configuring your machine for a wireless network (For MFC-9320CW)
p Enter a new WEP key you wrote down in step a on page 31. using keypad, see Entering Text on page 229.)

3

34