Wireless configuration for Macintosh

5 using the Brother installer application (MFC-9320CW only)

Configuration in Infrastructure mode

Before configuring the wireless settings

IMPORTANT

• The following instructions will install your Brother machine in a network environment using the Brother

5

installer application for Macintosh found on the CD-ROM we have provided with the machine.

•You can also setup your Brother machine using the machine’s control panel which we recommended. You can find instructions in the supplied Quick Setup Guide or see Configuring your machine for a wireless network (For MFC-9320CW).

•You must know your wireless network settings before you proceed with this installation.

Make sure you take notes on all the current settings such as SSID, authentication and encryption of your wireless network environment. If you do not know them, contact your network administrator or the manufacturer of your access point/router.

Check and record the current wireless network settings.

Network name:(SSID, ESSID)

Communication Mode

Authentication method

Encryption mode

Network key 4

Infrastructure

Open system

WEP 2

 

 

 

NONE

—

 

 

 

 

 

Shared key

WEP 2

 

 

WPA/WPA2-PSK 1

AES

 

 

 

TKIP 3

 

 

LEAP

CKIP

 

 

 

 

 

 

EAP-FAST/NONE

AES

 

 

 

 

 

 

EAP-FAST/MS-CHAPv2

TKIP

 

 

EAP-FAST/GTC

 

 

 

 

 

 

1WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA2-PSK (AES), WPA-PSK (TKIP/AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters.

65