Wireless configuration for Macintosh using the Brother installer application
LCD messages when using the SES/WPS/AOSS control panel menu
LCD shows | Connection status | Action |
| |
Setting WLAN | Searching or accessing the access |
|
| |
point, and downloading settings from the | — |
| ||
| access point. |
|
| |
|
|
|
| |
Connecting SES |
|
|
| |
Connecting WPS | Connecting the access point. | — |
| |
Connecting AOSS |
|
|
| |
Connected | Connection succeeded. | — |
| |
|
| Check that only one router or access point has | 5 | |
Connection Error | Session overlap has been detected. | the SecureEasySetup™ mode, the | ||
| ||||
Protected Setup mode or AOSS™ mode enabled |
| |||
|
| and try starting from step i again. |
| |
|
|
|
| |
No Access Point | The access point detection failed. | Move the machine closer to your access |
| |
point/router and try starting from step i again. |
| |||
|
|
|
| |
|
| 1 Try starting from step i again. |
| |
Connection Fail | Connection failed. | 2 If the same message continues, reset the |
| |
machine back to the factory settings and try |
| |||
|
|
| ||
|
| again. |
| |
|
|
|
|
m Click Next.
78