WLAN Enable On
Press Stop/Exit.
c Turn on your Macintosh.
d Put the supplied CD-ROM into your CD-ROM drive. Double-click the desktop.
Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch. Press Menu, 7, 2, 7. Using a or b, choose On and press OK.
Wireless configuration for Macintosh using the Brother installer application
Configuration using the SES/WPS/AOSS from the control panel menu (Automatic Wireless mode)
IMPORTANT
•If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation.
•If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, 7, 0 for Network Reset, press 1 for Reset and choose 1 for Yes to accept the change. The machine will restart automatically.
5
a b
e
75