Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.

Configuring your machine for a wireless network (For MFC-9320CW)

3

4

For example:

 

 

64-bit ASCII:

Uses 5 text characters e.g. “Hello” (this is case sensitive)

 

64-bit Hexadecimal:

Uses 10 digits of hexadecimal data e.g. “71f2234aba”

 

128-bit ASCII:

Uses 13 text characters e.g.

 

 

“Wirelesscomms” (this is case sensitive)

3

128-bit Hexadecimal:

Uses 26 digits of hexadecimal data

e.g.“71f2234ab56cd709e5412aa3ba”

This is supported for WPA-PSK only

Encryption key, WEP key, Passphrase.

For LEAP and EAP-FAST, record the User Name and Password

For example:

Network name:(SSID, ESSID)

HELLO

Communication Mode

Authentication method

Encryption mode

Network key

Infrastructure

WPA2-PSK

AES

12345678

 

 

 

 

b

c Press Menu on the control panel of the Brother machine.

d Press a or b to choose Network. Press OK.

Select ab or OK 7.Network

e Press a or b to choose WLAN. Press OK.

Network 2.WLAN

f Press a or b to choose Setup Wizard. Press OK.

WLAN

2.Setup Wizard

g If the following message appears, press 1 to choose On. The wired network interface will become inactive with this setting.

WLAN Enable ? 1.On 2.Off

h The machine will search for your network and display a list of available SSIDs. You should see the SSID

you wrote down earlier. If the machine finds more than one network use a or b key to choose your network, then press OK. Go to l.

If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to i.

32