Plug the machine’s power cord into the AC power outlet. Turn on the machine’s power switch.

Configuring your machine for a wireless network (For MFC-9320CW)

Using the PIN Method of Wi-Fi Protected Setup

If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the machine easily. The PIN (Personal Identification Number) Method is one of the connection methods

developed by the Wi-Fi Alliance®. By inputting a PIN which is created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security

settings. See the user’s guide for your wireless access point/router for instructions on how to access the 3 Wi-Fi Protected Setup mode.

Note

Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.

a

b Press Menu, 7, 2, 7. Using a or b, choose On and press OK. Press Stop/Exit.

WLAN Enable

On

c Press Menu, 7, 2, 4 for WPS w/PIN Code.

d The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.

Connecting WPS

PIN:XXXXXXXX

e Using a computer that is on the network, type “http://access point’s IP address/” into your browser. (Where “access point’s IP address” is the IP address of the device that is used as the Registrar 1.) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN which the LCD shows in d to the Registrar and follow the on-screen instructions.

1The Registrar is normally the access point/router.

Note

The setting page is different, depending on the brand of access point/router. See the instruction manual that came with your access point/router.

37