Wireless configuration for Macintosh using the Brother installer application
k To communicate with the
5
Note
You can temporarily change the wireless settings on your computer, following the steps below:
1Click the AirPort status icon.
2Select SETUP from the
3Your wireless network is connected successfully.
l Choose the machine you wish to configure, and click Next. If the list is blank, check if the machine is powered on, and then click Refresh.
Note
•The default Node name is “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
•You can find your machine’s MAC Address / Ethernet Address by printing out the Network Configuration List. See Printing the Network Configuration List on page 118.
84