Troubleshooting

Wireless network troubleshooting (For MFC-9320CW)

Wireless setup problems

The Brother print server is not found during setup by the Wireless Device Setup Wizard.

a Make sure that the machine is powered on, is on-line and ready to print.

b Move your Brother machine closer to your access point/router (or your computer for Ad-hoc) and try again.

c Reset the print server back to its default factory settings and try again. (For the information how to reset to the factory default settings, see Restoring the network settings to factory default on page 117.)

Why do I have to change my machine’s network setting to “Wired LAN” during setup although I am trying to setup Wireless LAN?

If you are using Windows® 2000, Mac OS X 10.3.9 or greater or your computer is connected to the wireless network using a network cable, it is recommended you temporarily connect the machine to your

access point/router or hub using a network cable. You will also need to change your machine’s network setting to wired LAN temporarily. Your machine’s network setting will be changed to wireless LAN automatically during the course of the setup.

„Windows®:

Using the Setup Wizard from the control panel on page 31.

Wireless configuration for Windows® using the Brother installer application (For MFC-9320CW)on page 39.

„Macintosh:

Using the Setup Wizard from the control panel on page 31.

Wireless configuration for Macintosh using the Brother installer application (MFC-9320CW only) on page 65.

14

195