Control panel setup
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine. Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section of the Relay function settings.
a
b Press a or b to choose Network. Press OK.
c Press a or b to choose
d Press a or b to choose Setup Relay. | 6 |
Press OK.
e Press a or b to choose Relay Report. Press OK.
f Press a or b to choose On or Off. Press OK.
g Press Stop/Exit.
Note
For more information on Relay Broadcast, see Relay broadcast from a computer on page 157.
How to set a new default for Scan to
You can choose the default color file type for the Scan to
Note
In order to use this function, please download the necessary software from the download page in the Brother Solution Center. (http://solutions.brother.com/)
a Press Menu.
b Press a or b to choose Network. Press OK.
c Press a or b to choose Scan To
112