(2)Remove the Taptite bind B M4x12 screw, and then remove the SW holder from the Main body.
(3)Remove the Taptite pan (S/P washer) M3.5x6 screw, and then remove the FG harness ASSY of the Inlet harness ASSY from the LV shield plate 2.
(4)Remove the two Taptite flat B M3x10 screws, and then remove the Inlet harness ASSY from the Main body.
(5)Remove the two Taptite cup S M3x6 SR screws, and then remove the PS PCB unit from the LV shield plate 2.
(6)Remove the two Edge holder 3 from the LV shield plate 2.
(7)Disconnect the Connector from the PS PCB unit.
|
| Edge holder 3 |
|
|
| LV shield plate 2 |
|
|
|
| 6 |
|
| 6 |
|
|
| Edge holder 3 |
|
|
| Inlet harness ASSY | |
|
| SW holder | Taptite flat B M3x10 |
|
| 2 | |
|
|
| |
|
| 4 |
|
| 7 | 5 |
|
|
|
| |
LV shield plate 2 |
| 3 |
|
|
|
| |
Connector |
|
|
|
|
|
| Taptite bind B |
|
|
| M4x12 |
PS PCB unit |
| Taptite pan |
|
|
|
| |
|
| (S/P washer) | Inlet harness ASSY |
|
| M3.5x6 |
|
Taptite cup S M3x6 SR | (FG harness ASSY) |
|
Fig.
Confidential |