(2)Remove the Taptite cup S M3x6 SR screw, and then remove the FG harness ASSY from the Laser unit.
(3)Remove the Taptite cup S M3x6 SR screw, and then remove the Air duct from the Laser unit.
Taptite cup S M3x6 SR
Air duct
2
3
FG harness ASSY
Laser unit
Fig.
CAUTION:
When replacing the Laser unit, replace the Serial label attached on the Drive sub ASSY with a new one supplied with a new unit. Another Serial label supplied with a new unit is spare. Make sure to throw it out. When replacing the Laser unit, it is necessary to input the characteristics information.
(Refer to "3. IF YOU REPLACE THE LASER UNIT" in Chapter 4.)
Serial label
Drive sub ASSY
2 to 10mm
Drive sub ASSY
Serial label
Fig.
Confidential |