The service mode is exclusively designed for the purpose of checks, settings and adjustments, and this function should be accessed by service personnel only. You can perform a print test and display the log information.
<Procedure>
(1)Check that the front cover is open.
(2)Turn ON the power switch while holding down the SW supporter. Check that Toner/ Drum/Error LEDs are lighted.
(3)Release the SW supporter and check that all LEDs are off.
(4)See accompanying table, press the SW supporter once, twice or for 2 seconds. (long push), and then shift to each mode.
Press the SW supporter once
Press the SW supporter again depending on the necessary number of times after check that Toner/Drum/Error LEDs are lighted.
Press the SW supporter |
| Mode |
|
|
|
|
|
|
Once | ||
|
| |
Twice | ||
|
|
|
Three times | ||
|
| |
Four times | ||
|
| |
Five times | ||
|
|
|
Six times | ||
|
|
|
Seven times | ||
|
| |
More than Eight times | Go back to Normal State | |
|
|
|
Confidential |