Brother 2150N, 2170W, HL-2140 10) Paper jam

10) Paper jam

•JAM TRAY 1

No paper in Tray 1 (T1)

User Check

•Check if the paper is jammed in the appropriate tray. If jammed, remove it.

•Adjust the paper guide corresponding to the paper size.

•Check if too much paper is loaded in the tray.

Step		Cause		Remedy
1	Edge actuator or registration front		Correct catching of the edge actuator or
	actuator catching on some position		registration front actuator.
	Registration front sensor PCB		Check the edge sensor and registration
	failure		front sensor performance following the
2			procedure in "Factory Inspection Mode"
			(Chapter 5). If any problem occurs, replace
			the registration front sensor PCB ASSY.
3	Paper feeding kit worn out		Replace the paper feeding kit.
	Harness connection failure of		Check the harness connections of the
4	registration front sensor PCB		registration front sensor PCB, and
			reconnect it.
	Registration front sensor PCB		Check the sensor performance following
5	failure		the procedure in "Factory Inspection Mode"
			(Chapter 5). If any problem occurs, replace
			the registration front sensor PCB ASSY.
6	Toner LED PCB failure		Replace the toner LED PCB ASSY.
7	Registration ground spring loose		Fit the registration ground spring correctly.
			(Refer to Fig. 1-3.)
8	Main PCB failure		Replace the main PCB ASSY.

<Main frame R ASSY>

Registration ground spring

Fig. 1-3

1-13 Confidential