Press the SW supporter twice

Press the SW supporter again depending on the necessary number of times after check that Toner/Drum/Error LEDs are lighted.

Press the SW supporter

 

Mode

 

 

 

 

 

 

Once

16)

Printing for Maintenance

 

* Start printing when close the front cover.

 

 

 

Twice

17)

Printer Settings

 

* Start printing when close the front cover.

 

 

Three times

18) Sleep Mode Indication (OFF/Dimmed)

 

 

Four times

19) Sleep Mode Setting (ON/OFF)

 

* Check that all LEDs are lighted for one second.

 

 

 

Five times

20)

Developer Roller Counter Reset 1

 

 

(For the starter toner cartridge)

 

* Check that all LEDs are lighted for one second.

 

 

 

Six times

21)

Developer Roller Counter Reset 2

 

 

(For the standard toner cartridge)

 

* Check that all LEDs are lighted for one second.

 

 

 

Seven times

22)

Developer Roller Counter Reset 3

 

 

(For the high-capacity toner cartridge)

 

* Check that all LEDs are lighted for one second.

 

 

More than eight times

Go back to Normal State

 

 

 

Press the SW supporter more than 2 seconds (long push).

Check that Error LED is lighted.

PIT3 Inspection Mode * Factory use.

CAUTION:

•Each mode starts 2 seconds after pressing the SW supporter.

•If the SW supporter is pressed, the Ready LED is lighted. If the SW supporter is released, the Ready LED is out.

5-6

Confidential