2.DISTINGUISH ERROR CAUSE
2.1LED indication
2.1.1 LED indication at Operator Calls
Distinguish the contents of message by LED indication in the control panel. See the reference page and take the corrective action described for each indication to correct it. when the red Error LED is ON or blinking to indicate it, the machine automatically recovers from most errors. But some of errors are necessary to reset the machine by holding down the [Go] button.
LED indication of the following table is that
LED is OFF, 
LED is ON and 
LED is blinking.
|
| Error clearance by |
|
LED | Type of error | pressing the | Refer to: |
|
| [Go] button |
|
|
|
|
|
|
|
|
|
|
|
N/A1-8
N/A1-8
3) Toner cartridge is at the end of life
N/A1-8
N/A1-9
Confidential |