Do NOT unplug the power cord or remove the media card from the media drive (slot) while the machine is reading or writing to the card (the PhotoCapture key is blinking). You will lose your data or damage the card.
The machine can only read one Media card at a time so do not insert more than one card. The settings that you want to use with the card will be kept until you take out the media card from the drive (slot), print images or press Stop/Exit.
1
2
Insert the media card firmly into the media drive (slot).
When you insert your media card | C.Flash Active |
into the proper slot, the LCD shows. |
|
| Press PhotoCapture key... |
The media active message will be shown for 60 seconds and then disappear. Even in that case, you can enter the PhotoCapture mode by pressing PhotoCapture.
3 Press PhotoCapture.
The LCD shows: |
| Photo:Select ▲▼ |
|
| |
Print Index | ▲▼ | |
|
| |
Print Images ▲▼ | |
| |
Select |
|
11 - 4