STEP B: Alignment Check

The LCD shows:

Is Step "B" OK?

1.Yes 2.No

9 Check the 600 dpi and 1200 dpi test

prints to see if number 5 most closely matches number 0. If the number 5 sample of both the 600 dpi and 1200 dpi are the best matches, press 1 (Yes) to finish STEP B.

—OR—

If another test print number is a better match for either 600 dpi or 1200 dpi, press 2 (No) to select it.

10 For 600 dpi, press the number of the test print that most closely matches the number 0 sample (1-8).

11 For 1200 dpi, press the number of the test print that most closely matches the number 0 sample (1-8).

600dpi Adjust Select Best #

1200dpi Adjust Select Best #

12 Repeat Steps 1 and 2 (in Print Quality Check) to print another sample Print Quality Check Sheet and then check it.

13 Press Stop/Exit.

When an ink head nozzle is clogged the printed sample looks like this.

After the ink head nozzle is cleaned, the horizontal lines are gone.

13 - 14 TROUBLESHOOTING AND ROUTINE MAINTENANCE