Check the quality of the four colour
blocks on the sheet. (Black/Cyan/Yellow/Magenta).
STEP A: Colour block quality check
The LCD shows: | Is Step "A" OK? |
4
1.Yes 2.No
5 If all lines are clear and visible, press 1 (Yes) to go to STEP B.
If you can see missing short lines as shown below, press 2 (No).
OKPoor
The LCD will ask you if the print quality is OK for each colour.
6 Press 2 (No) for any colour with a problem.
The LCD shows:
Press 1 (Yes). The machine will start cleaning the colours.
Black OK?
1.Yes 2.No
Start Cleaning?
1.Yes 2.No
7 After cleaning is finished, press Mono Start or Colour Start. The machine will start printing the Print Quality Check Sheet again and then return to STEP A.
8 If STEP A is OK, press 1 to proceed to STEP B.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 13 - 13