Faxing from the Scanner Glass

You can use the scanner glass to fax one page at a time or pages of a book. Originals can be Letter or A4 size (8.5 inches to 11.7 inches).

To use the scanner glass, the ADF must be empty.

Document

Originals are

Cover

Face Down

 

on the Scanner

 

Glass

1Lift the document cover.

2Using the document guidelines on the left, center the original face down on the scanner glass.

3Close the document cover.

If the original is a book or is thick, do not slam down the cover or press on it.

4Dial the fax number, then press Fax Start. The MFC starts scanning the first page.

5To send a single page, go to Step 7

—OR—

To send multiple pages, go to Step 6.

MEMORY #001 99%

NEXT:PRESS SET DIAL:PRESS START

6Place the next page on the scanner glass, and then press Set. The MFC starts scanning. (Repeat Step 6 for each additional page.)

7Press Fax Start to begin dialing.

Press Stop/Exit to cancel. If the original was scanned into memory, press 1 to CLEAR it—OR—2to EXIT.

If memory is full, and you are faxing a single page, it will be sent in real time.

You cannot fax from the scanner glass when the MFC is sending, receiving or printing a fax.

6 - 3 S E T U P S E N D