Very Important
If you have Voice Mail, or a TAD (Telephone Answering Device) and want to keep one of your phone numbers dedicated only to fax calls, you must leave the MFC in MANUAL mode at all times while using the Distinctive Ring Feature. Here’s why: Manual mode will never pick up a call by itself, since it is «Neutral». When the MFC is in this «neutral» mode, the Distinctive Ring Feature can be activated. The Distinctive Ring Feature is actually an answering mode. So, do not activate FAX ONLY mode while using distinctive ring; otherwise, the MFC will answer calls for all the numbers.
Registering the Distinctive Ring Pattern
1 Set the MFC to MANUAL mode. | 1.DISTINCTIVE |
|
2Press Menu, 2, 0, 1.
3Press 
or 
to select DISTINCTIVE:SET and then press Set.
4Press 
or 
to select the prestored ring pattern you want to assign, and then press Set. (You will hear each pattern as you scoll through the four patterns.) Be sure to choose the pattern assigned by the Telephone Company.
5Press Stop/Exit.
Caller ID
The Caller ID feature of this MFC lets you use the Caller ID subscriber service offered by many local phone companies. This service provides the LCD, the name or telephone number of your caller on the LCD as the line rings. (See Printing Caller ID List, page
After a few rings, the LCD shows the telephone number of your caller (or name, if available). Once you pick up the handset, the Caller ID information disappears from the LCD, but the call information remains stored in the Caller ID memory.
■You will see the first 16 characters of the number or name.
■OUT OF AREA means call originates outside your Caller ID service area.
■PRIVATE CALL means the caller has intentionally blocked transmission of information.
If both the name and number are received, the LCD shows only the name. You can print a list of Caller ID information received by your MFC.
T E L E P H O N E S E R V I C E S | 8 - 3 |