Speed Dialing

1Place the original face up in the ADF, or face down on the scanner glass.

2Press Search/Speed Dial, #, and then press the two-digit Speed Dial number.

3Press Fax Start.

One Touch Dialing

1Place the original face up in the ADF, or face down on the scanner glass.

2Press the One Touch key of the location you want to call.

3Press Fax Start.

If you try to use a One Touch or Speed Dial location with no number stored in it, you hear a warning sound, and LCD shows NOT REGISTERED. The LCD returns to normal after 2 seconds.

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers when you make a call. Rates may vary depending upon the time and destination. To take advantage of low rates, you can store the access codes or long-distance carriers as One Touch and Speed Dial numbers. You can store these long dialing sequences by dividing them and setting them up separately in any combination. You can even include manual dialing using the dial pad. The combined number will be dialed in the order you entered it, as soon as you press Fax Start. (See Storing One Touch Dial Numbers, page 7-1.)

You store “555” on One Touch key 03 and “7000” on One Touch key 02. If you press One Touch 03, 02 and Fax Start you will dial “555-7000”. To temporarily change a number, you can substitute part of the number with manual dialing using the dial pad. For example, to change the number to 555-7001 you can press One Touch 03, and then press 7, 0, 0, 1 using the dial pad.

Note If you must wait for another dial tone at any point in the dialing sequence, store a pause at that point in the number by pressing Redial/Pause. Each key press adds a 3.5 second delay.

7 - 4 A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S