Installing the Remote Printer Console

Before you install the program, make sure you have the following hardware and software to install the program:

DOS

Version 3.3 or later

Monitor

EGA/VGA or compatible

Option

Mouse; the mouse driver must be installed.

 

(You can also operate the program with the keyboard.)

Follow these steps to install the remote printer console program:

1Make sure your Brother MFC is connected to your computer and is set to Online.

2Start your computer and go to the DOS prompt. If you are in Windows®, exit and return to the DOS prompt.

3Insert the Brother CD-ROM into your CD-ROM drive.

4At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM drive for “x”), and then press Enter.

C:\>x:

5Type CD RPCX, and then press Enter. x:\>CD RPCX

6Type RPCSETUP, and then press Enter. x:\RPCX>RPCSETUP

7Follow the instructions in the installer.

12 - 2 F O R D O S U S E R S