Bryant 580F installation instructions 13, C. Heat Anticipator Settings

Route thermostat cable or equivalent single leads of colored wire from thermostat subbase terminals to low-voltage con- nections on unit (shown in Fig. 10) as described in Steps 1-4 below.

If unit is mounted on roof curb and accessory thru-the-curb service plate connection is used, route wire through connec- tion plate.

Pass control wires through the hole provided on unit (see connection D in Connection Sizes table in Fig. 1A and 1 B).

Feed wires through the raceway built into the corner post to the 24-v barrier located on the left side of the control box.

See Fig. 11. The raceway provides the UL-required (Under- writers’ Laboratories) clearance between high- and low- voltage wiring.

Connect thermostat wires to screw terminals on low-voltage connection board.

C. Heat Anticipator Settings

Set heat anticipator settings at .14 amp for the first stage and .20 amp for second-stage heating.

Table 2A — Electrical Data (Without Convenience Outlet)

	UNIT	NOMINAL	IFM	VOLTAGE			COMPR			OFM		IFM	COMBUSTION	POWER SUPPLY*		DISCONNECT
				RANGE			(ea)			(ea)			FAN MOTOR				SIZE†
	580F	VOLTAGE	TYPE										FLA
				Min	Max	Qty	RLA	LRA	Qty	Hp	FLA	FLA		MCA	MOCP**	FLA		LRA
			Std									5.8		40.1/40.1	45/45	42/42		229/229
		208/230-3-60	Alt	187	254	2	14.0	91.0	2	1/4	1.4	5.8	.6	40.1/40.1	45/45	42/42		229/229
			High									10.6		44.9/44.9	50/50	48/48		273/273
	090		Std									2.6		18.4	20	19		108
		460-3-60	Alt	414	508	2	6.4	42.0	2	1/4	0.7	2.6	.3	18.4	20	19		108
(71/2 Tons)
			High									4.8		20.6	25	22		130
			Std									2.6		14.9	20	16		97
		575-3-60	Alt	518	632	2	5.2	39.0	2	1/4	0.7	2.6	.3	14.9	20	16		97
			High									4.8		16.7	20	18		114
			Std									5.8		40.1/40.1	45/45	42/42		229/229
		208/230-3-60	Alt	187	254	2	14.0	91.0	2	1/4	1.4	5.8	.6	40.1/40.1	45/45	42/42		229/229
			High									10.6		44.9/44.9	50/50	48/48		273/273
	091		Std									2.6		18.4	20	19		108
		460-3-60	Alt	414	508	2	6.4	42.0	2	1/4	0.7	2.6	.3	18.4	20	19		108
(71/2 Tons)
			High									4.8		20.6	25	22		130
			Std									2.6		14.9	20	16		97
		575-3-60	Alt	518	632	2	5.2	39.0	2	1/4	0.7	2.6	.3	14.9	20	16		97
			High									4.8		16.7	20	18		114
		208/230-3-60	Std	187	254	2	16.0	137.0	2	1/4	1.4	5.8	.6	44.6/44.6	50/50	47/47		321/321
			High									10.6		49.4/49.4	60/60	52/52		365/365
	102	460-3-60	Std	414	508	2	8.3	69.0	2	1/4	0.7	2.6	.3	22.7	25	24		162
(81/ Tons)			High									4.8		24.9	30	26		184
	2
		575-3-60	Std	518	632	2	6.4	58.0	2	1/4	0.7	2.6	.3	17.6	20	18		135
			High									4.8		19.4	25	20		152
		208/230-3-60	Std	187	254	2	17.3***	120.0***	2	1/4	1.4	5.8	.6	44.3/44.3	50/50	46/46		272/272
			High									10.6		49.1/49.1	60/60	52/52		316/316
	103	460-3-60	Std	414	508	2	7.9***	70.0***	2	1/4	0.7	2.6	.3	21.0	25	22		149
(81/ Tons)			High									4.8		23.2	30	24		171
	2
		575-3-60	Std	518	632	2	5.5***	50.0***	2	1/4	0.7	2.6	.3	16.7	20	17		109
			High									4.8		18.5	25	19		126
			Std									5.8		44.2/44.2	50/50	46/46		307/307
		208/230-3-60	Alt	187	254	2	15.8	130.0	2	1/4	1.4	7.5	.6	45.9/45.9	50/50	48/48		326/326
			High									15.0		53.4/53.4	60/60	57/57		374/374
	120		Std									2.6		21.8	25	23		152
		460-3-60	Alt	414	508	2	7.9	64.0	2	1/4	0.7	3.4	.3	22.6	25	24		191
(10 Tons)
			High									7.4		26.6	30	28		185
			Std									2.6		18.1	25	19		123
		575-3-60	Alt	518	632	2	6.6	52.0	2	1/4	0.7	3.4	.3	18.7	25	20		155
			High									7.4		21.9	30	23		150
			Std									5.8		44.6/44.6	50/50	47/47		297/297
		208/230-3-60	Alt	187	254	2	16.0	125.0	2	1/4	1.4	7.5	.6	46.3/46.3	60/60	49/49		316/316
			High									15.0		53.4/53.4	60/60	57/57		374/374
	121		Std									2.6		22.0	25	24		188
		460-3-60	Alt	414	508	2	8.0	62.5	2	1/4	0.7	3.4	.3	22.8	25	24		191
(10 Tons)
			High									7.4		26.8	30	29		182
			Std									2.6		17.4	20	18		119
		575-3-60	Alt	518	632	2	6.3	50.0	2	1/4	0.7	3.4	.3	18.0	20	19		151
			High									7.4		21.2	25	23		146
		208/230-3-60	Std	187	254	2	23.0	146.0	2	1/4	1.4	10.6	.6	65.2/65.2	80/80††	68/68		383/383
			Alt									15.0		69.6/69.6	80/80††	73/73		406/406
	150	460-3-60	Std	414	508	2	10.4	73.0	2	1/4	0.7	4.8	.3	29.6	40	31		192
(12	1
	/2 Tons)		Alt									7.4		32.2	45	34		203
		575-3-60	Std	518	632	2	8.3	58.4	2	1/4	0.7	4.8	.3	23.6	30	25		154
			Alt									7.4		25.7	30	27		162
		208/230-3-60	Std	187	254	2	19.0	156.0	2	1/4	1.4	10.6	.6	56.2/56.2	70/70††	59/59		359/359
			Alt									15.0		60.6/60.6	70/70††	64/64		378/378
	151	460-3-60	Std	414	508	2	9.0	75.0	2	1/4	0.7	4.8	.3	26.5	30	28		174
(12	1
	/2 Tons)		Alt									7.4		29.1	35	31		213
		575-3-60	Std	518	632	2	7.4	54.0	2	1/4	0.7	4.8	.3	21.6	25	23		127
			Alt									7.4		23.7	30	25		159

—13—