Bryant 580F installation instructions

Table 1A — Physical Data (580F090, 102, 120, 150 Units)

UNIT SIZE 580F		090			102		120		150
NOMINAL CAPACITY (tons)		71/			81/		10		121/
			2		2				2
OPERATING WEIGHT (lb)
Unit
Al/Al*		870			880		1035		1050
Al/Cu*		881			896		1057		1077
Cu/Cu*		893			907		1080		1100
Economizer
EconoMi$er+		75			75		75		75
Roof Curb†		143			143		143		143
COMPRESSOR		Reciprocating			Reciprocating		Reciprocating		Scroll
Quantity		2			2		2		2
No. Cylinders (per Circuit)		2			2		2		—
Oil (oz)		42 ea			65 ea		54 ea		54 ea
REFRIGERANT TYPE						R-22
Expansion Device					Fixed Orifice Metering Device
Operating Charge (lb-oz)
Circuit 1		4-13			6-14		7- 3		8-10
Circuit 2		4-14			9- 2		7-13		8- 6
CONDENSER COIL				Enhanced Copper Tubes, Aluminum Lanced Fins
Rows...Fins/in.		1...17			2...17		2...17		2...17
Total Face Area (sq ft)		20.50			18.00		20.47		25.00
CONDENSER FAN					Propeller Type
Nominal Cfm		6400			6400		7000		7000
Quantity...Diameter (in.)		2...22			2...22		2...22		2...22
Motor Hp...Rpm		1/ ...1100			1/ ...1100		1/ ...1100		1/ ...1100
Watts Input (Total)		4			4		4		4
		600			600		600		600
EVAPORATOR COIL			Enhanced Copper Tubes, Aluminum Double-Wavy Fins, Face Split
Rows...Fins/in.		3...15			3...15		3...15		4...15
Total Face Area (sq ft)		8.0			8.0		10.0		11.1
EVAPORATOR FAN					Centrifugal Type
Quantity...Size (in.)	Std	1...15 x 15			1...15 x 15		1...15 x 15		1...15 x 15
	Alt	1...15 x 15			—		1...15 x 15		1...15 x 15
	High-Static	1...15 x 15			1...15 x 15		1...15 x 15		—
Type Drive	Std	Belt			Belt		Belt		Belt
	Alt	Belt			—		Belt		Belt
Nominal Cfm	High-Static	Belt			Belt		Belt		—
		3000			3100		4000		5000
Maximum Continuous Bhp	Std	2.40			2.40		2.40		3.70
	Alt	2.40			—		2.90		5.25
	High-Static	3.70			3.70		5.25		—
Motor Frame Size	Std	56			56		56		56
	Alt	56			—		56		56
	High-Static	56			56		56		—
Fan Rpm Range	Std	590-840			685-935		685-935		860-1080
	Alt	685-935			—		835-1085		830-1130
Motor Bearing Type	High-Static	860-1080			860-1080		830-1130		—
		Ball			Ball		Ball		Ball
Maximum Allowable Rpm		2100			2100		2100		2100
Motor Pulley Pitch Diameter Min/Max (in.)	Std	2.4/3.4			2.8/3.8		2.8/3.8		4.0/5.0
	Alt	2.8/3.8			—		3.4/4.4		3.1/4.1
	High-Static	4.0/5.0			4.0/5.0		2.8/3.8		—
Nominal Motor Shaft Diameter (in.)	Std	5/	8		5/		5/	8	7/
	Alt	1/			8		7/		8
			2		—			8	7/
	High-Static	7/			7/		7/		8
			8					8	—
Fan Pulley Pitch Diameter (in.)	Std				8				8.0
		7.0			7.0		7.0
	Alt	7.0			—		7.0		5.9
	High-Static	8.0			8.0		5.8		—
Belt, Quantity...Type...Length (in.)	Std	1...A...49			1...A...49		1...A...49		1...A...52
	Alt	1...A...49			—		1...A...49		1...BX...46
	High-Static	1...A...55			1...A...55		1...BX...46		—
Pulley Center Line Distance (in.)	Std	16.75-19.25			16.75-19.25		15.85-17.50		15.85-17.50
	Alt	16.75-19.25			—		15.85-17.50		15.85-17.50
	High-Static	16.75-19.25			16.75-19.25		15.85-17.50		—
Speed Change per Full Turn of	Std	50			50		50		44
Movable Pulley Flange (rpm)	Alt	50			—		50		50
	High-Static	60			60		60		—
Movable Pulley Maximum Full Turns	Std	5			5		5		5
From Closed Position	Alt	5			—		5		6
	High-Static	5			5		6		—
Factory Setting	Std	5			5		5		5
	Alt	5			—		5		5
	High-Static	5			5		5		—
Factory Speed Setting (rpm)	Std	590			685		685		860
	Alt	685			—		835		887
Fan Shaft Diameter at Pulley (in.)	High-Static	860			860		887		—
		1			1		1		1

		LEGEND
Al	—	Aluminum
Bhp —		Brake Horsepower
Cu	—	Copper

*Evaporator coil fin material/condenser coil fin material. Contact your local repre- sentative for details about coated fins.

†Weight of 14-in. roof curb.

**Rollout switch lockout is manually reset by interrupting power to unit or resetting thermostat.

NOTE: High-static motor not available on size 150 and 151 units.

—8—