BT Diverse 2016 Using and changing the system code and handset, If you want to use remote access

Using your Diverse 2016 telephone

Using and changing the system code and handset

PIN

As a digital phone system, your Diverse 2016 provides excellent security against others ‘listening in’ to your calls. You can also prevent unauthorised use of the handset(s). Each handset needs to be registered with the base station. To do this you need to know and use the system code.

The default setting for both the system code and handset PIN is 0000. If you do not wish to change either, you can use this number for all code and PIN - related functions.

If you want to use remote access

(i.e. call your Diverse 2016 from another phone to play back your messages) you will need to change the system code from 0000.

For instructions on using remote access, see page 36.

To change a system code for the Diverse 2016 base station

This protects your settings and helps prevent unauthorised handsets using your system.

The default setting for the system code is 0000. You can change this to any 4-digit number.

Handset power must be switched to ON. And you must be in range of the base station.

	#	TUV	✱
STO		8

•Press the STO button then the # button.

•Press 8 on the keypad.

•Press the ✱ button.

•Enter the current system code (default 0000).

•Enter the 4-digit code you want.

•Confirm the code by entering it again.

•Press the STO button. The code is now entered.

•A long beep will confirm the new setting.

16