BT Synergy 3500 manual To de-register a Synergy 3000 additional handset from the base, the menu

Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461

that are flashing indicate other bases that the handset is already registered to).

Enter the base number

(BS 1-4) that you want to register the handset to.

Enter your 4-digit PIN (original factory setting OOOO) and press the  button.

The display will show SEARCH 1, 2, 3, 4 and the symbol will flash as the handset tries to locate the base. When the handset locates the base, the handset will be automatically selected and shown on the display.

Note

If the handset does not locate the base, the handset will return to the previous menu. Try to register again by using a different available base number. Ensure that you are in close vicinity of the base).

Note

Your 4 digit PIN number is 0000 unless you have previously allocated a new PIN number as explained on page 29.

To de-register a Synergy 3000 additional handset from

the base

Note

Handsets can only be de-registered via another handset.

Menu	Press the  button to enter
	the menu.
Redial	Use the DOWN button to
Vol
Calls	scroll to SETUP and press the
Menu

button.

Redial	Use the DOWN button to
Vol
Calls	scroll to DEL HS and press
Menu	the  button.
	The display will show PIN?
	Enter your 4-digit PIN.
Menu	Press the  button.
Redial	Use the UP or DOWN button
Vol	to select the handset you want
Calls
	to de-register (HANDSET 1-5).
Menu	Press the  button. Display
	shows CONFIRM?.
Menu	Press . You will hear a
	confirmation beep.

Once de-registered, the handset will display NOT REG.

ADDITIONAL

54