BT Synergy 3500 manual Audible Message alert, To change the answer delay setting

Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461

ANSWER MACHINE

To change the answer delay setting

Skip	Press and hold the SKIP 
	button on the base unit until
	the current setting is
	announced, then release.
Skip	Press and release the SKIP 
	button to move through the
	settings, with each press the
	options will be announced
	and will also be shown on the
	base unit display, i.e 8, 9,
	Time Saver, 2, 3, 4, 5, 6, 7.
	When you hear the setting
	you want, do not press the
	SKIP  button again. After a
	short delay your chosen
	setting will be announced.

Audible Message alert

When audible message is switched ON and new messages have been received, your Synergy 3500 will beep every

10 seconds. The volume of the beep is at the volume you have set for the loudspeaker. The default setting is OFF.

To switch audible message alert ON or OFF

Press and hold the  SKIP

Skip	button on the base unit to
	change the setting.

The prompt will announce “Message alert on/off” as appropriate.

To check the answer delay setting at the base station

Skip Press and release the SKIP   button.

The current setting will be announced and also shown on the base unit display.

37