Cabletron Systems 1200, 1000 manual Return to the Security Configuration Menu

IP ROUTING NETWORK

Configure the CyberSWITCH

The following screen will be displayed after all four devices in our example have been entered:

Current Device Table (Sorted by Device Name in Ascending ASCII Order)

id DEVICE NAME

-----------------------------

1"Jill Smith"

2"Rick Bear"

3"Todd Jones"

4"Ralph Moose"

(1)Add, (2) Change, (3) Delete, (4) Display a Device or press <RET> for previous menu?

Return to the Security Configuration Menu.

CONFIGURING THE USER LEVEL DATABASES

This network doesn’t require the use of a user level database. Therefore, no changes are necessary.

CONFIGURING THE OFF-NODE SERVER INFORMATION

The default configuration for Off-node Server Information is None (Use On-node). Since this network doesn’t require the use of an off-node server, no changes are necessary.

CONFIGURING THE NETWORK LOGIN INFORMATION

This network doesn’t require the use of a user level database so network login information configuration is not necessary.

SAVE CONFIGURATION FILES

We have now configured all the required information for this example. Press 4 from the Main menu to save the changes. The old configuration files will be stored in the \CONFIG directory with a file extension of .BAK (e.g., the old NODE.NEI file will be called NODE.BAK).

After you save the configuration files, press <RET> to exit the CFGEDIT program. Reboot the system to activate your changes.

Workgroup Remote Access Switch 43