Manuals / Cabletron Systems / Computer Equipment / Switch

Cabletron Systems 1200, 1000 manual Ipx Routing Network, Overview, Initial Installation Steps

Models: 1200 1000

1 106

Download 106 pages 14.3 Kb

Page 77

IPX ROUTING NETWORK

OVERVIEW

This sample network uses IPX protocol to allow remote devices and their servers to communicate. It illustrates a master network in which the central-site CyberSWITCH communicates with:

•Remote bridges using a Remote LAN interface, and

•A remote IPX router using a traditional WAN interface.

To better understand the layout of this network, refer to the following Network Topology Worksheet. Note that the central-site master network is in Detroit. Tampa and Orlando represent the bridged sites, and Dallas represents the remote WAN site.

System details appear in the worksheets and are followed by the unique portion of this network’s configuration procedure.

BUSINESS ASSUMPTIONS

•All devices are PPP-compliant.

•Central site is on a PBX; therefore, 9 required to dial out.

•No File Servers at Tampa or Orlando sites.

•Uses the On-node Device Database for authentication database.

•Uses PAP to authenticate remotes; CHAP on central site.

•Assumes Dallas Network supports Triggered RIP/SAP (i.e., compatible with central site).

•Central site dials out only to Dallas; Tampa and Orlando dial in to central site.

•Central site supports two BRI lines (4-port BRI card), with 5ESS custom switch configuration.

•Assumes bridging enabled at system level (at central site) so that the device routes enabled network-layer protocols and bridges all other packets.

•Uses no filtering; unrestricted mode.

INITIAL INSTALLATION STEPS

The initial steps in the CyberSWITCH installation process are basically the same no matter how detailed the network. These steps are:

•completing the requirement worksheets

•ordering ISDN service

•powering on the system

•accessing Release Notes

•connecting an administration console

•setting up Telnet access

•upgrading system software

•changing defaults to secure system

•returning configuration to factory defaults

The chapters Accessing the CyberSWITCH and Upgrading System Software (in the User’s Guide) describe each of these steps in detail.

Image 77

Cabletron Systems 1200, 1000 manual Ipx Routing Network, Overview, Initial Installation Steps, Business Assumptions

Contents

Release Cabletron Systems WORKGROUP REMOTE ACCESS SWITCHEXAMPLE NETWORKS Only qualified personnel should perform installation procedures VIRUS DISCLAIMEREXAMPLE NETWORKS FCC NOTICE TRADEMARKSCOPYRIGHTS VCCI NOTICE DOC NOTICECABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT 4 CyberSWITCHSimple Remote Bridging Network CONTENTSRemote Bridging Network with Security IP Routing NetworkIPX Routing Network IP Routing Network with PPP Devices6 CyberSWITCH EXAMPLE NETWORKSIndex AppleTalk Routing NetworkInitial Installation Steps Configure the CyberSWITCHSimple Remote Bridging Network EXAMPLE NETWORKSRemote Bridging Network with Security IP Routing NetworkCONFIGURING THE SIMPLE REMOTE BRIDGE INITIAL INSTALLATION STEPSSIMPLE REMOTE BRIDGING NETWORK OVERVIEWLINES RESOURCESEXAMPLE NETWORKS BRI LinesIP ROUTING BRIDGING AND ROUTING INFORMATION BRIDGINGNetwork Interface Information Static RoutesThe following Main Menu will then be displayed CONFIGURE THE CYBERSWITCHEXAMPLE NETWORKS Current DATA LINK Configuration for this line id TEI Select Option default = POINTTOPOINT or press RET for previous menuThere are currently no Data Links configured for this line Automatic TEI Negotiation Y or N default = Y? YEXAMPLE NETWORKS To enable the IP Host Operating ModeTo configure the IP host interface SAVE CONFIGURATION FILESEXAMPLE NETWORKS VERIFY THE INSTALLATIONOVERVIEW REMOTE BRIDGING NETWORK WITH SECURITYINITIAL INSTALLATION STEPS 18 CyberSWITCH ISDNEXAMPLE NETWORKS NETWORK TOPOLOGYLINES RESOURCESBRI Lines PRI LinesAuthentication Information DEVICE INFORMATIONEXAMPLE NETWORKS Calling ISDN, FR, etc. InformationAuthentication Information DEVICE INFORMATIONCalling ISDN, FR, etc. Information X.25 InformationBRIDGING AND ROUTING INFORMATION BRIDGING EXAMPLE NETWORKSIP ROUTING Network Interface InformationCONFIGURING THE SECURITY CONFIGURE THE CYBERSWITCHCONFIGURING THE OPTIONS After enabling Device Level Security, return to the Security Menu EXAMPLE NETWORKSDial Out Phone Numbers PPP Point to Point Protocol26 CyberSWITCH SAVE CONFIGURATION FILESUser Level Authentication EXAMPLE NETWORKSVerify the Installation VERIFY THE INSTALLATIONOVERVIEW IP ROUTING NETWORKINITIAL INSTALLATION STEPS San Fran SITEISDN IP ROUTING NETWORKEXAMPLE NETWORKS SYSTEM DETAILSRESOURCES LINESDEVICE INFORMATION Authentication InformationCalling ISDN, FR, etc. Information X.25 InformationEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationDEVICE INFORMATION Authentication InformationCalling ISDN, FR, etc. Information X.25 InformationEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationBRIDGING AND ROUTING INFORMATION BRIDGING Workgroup Remote Access SwitchIP ROUTING Network Interface InformationCONFIGURE THE CYBERSWITCH CONFIGURING THE CYBERSWITCH OPTIONS36 CyberSWITCH EXAMPLE NETWORKSCONFIGURING THE IP INTERFACE INFORMATION EXAMPLE NETWORKS 38 CyberSWITCHNo Authentication 40 CyberSWITCH CONFIGURING THE SECURITYEXAMPLE NETWORKS Current INTERFACEBefore beginning, note the following EXAMPLE NETWORKS 42 CyberSWITCHCONFIGURING THE USER LEVEL DATABASES SAVE CONFIGURATION FILESCONFIGURING THE OFF-NODE SERVER INFORMATION CONFIGURING THE NETWORK LOGIN INFORMATIONEXAMPLE NETWORKS VERIFY THE INSTALLATION44 CyberSWITCH INITIAL INSTALLATION STEPS BUSINESS ASSUMPTIONSIP ROUTING NETWORK WITH REMOTE BRIDGE DEVICES OVERVIEWCorporate Office ISDNRemote Satellite OfficesLINES RESOURCESBRI Lines PRI LinesEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationDEVICE INFORMATION Authentication InformationCalling ISDN, FR, etc. Information X.25 InformationBRIDGING AND ROUTING INFORMATION BRIDGING EXAMPLE NETWORKSIP ROUTING Network Interface InformationCONFIGURING THE CYBERSWITCH OPTIONS CONFIGURE THE CYBERSWITCHThe sequence of prompts will be similar to the following EXAMPLE NETWORKSYou will then be prompted to verify your input. Make changes if necessary, or, if original input correct, continue with configuration for RLAN interface EXAMPLE NETWORKS CONFIGURING THE SECURITY54 CyberSWITCH Configure the CyberSWITCH Workgroup Remote Access SwitchEXAMPLE NETWORKS 56 CyberSWITCHVERIFY THE INSTALLATION OVERVIEW IP ROUTING NETWORK WITH PPP DEVICESINITIAL INSTALLATION STEPS IP ROUTING NETWORK WITH PPP DEVICES ISDNSYSTEM DETAILS EXAMPLE NETWORKSRESOURCES LINESFor SITE BRIDGING AND ROUTING INFORMATIONBRIDGING IP ROUTINGBRIDGING AND ROUTING INFORMATION EXAMPLE NETWORKSFor SITE BRIDGINGDEVICE INFORMATION Authentication InformationCalling ISDN, FR, etc. Information X.25 InformationEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationCONFIGURING THE SYSTEM OPTIONS CONFIGURE SITE1You will then be asked for the IP Address for the interface. Enter EXAMPLE NETWORKSThe screen interaction will resemble the following Workgroup Remote Access SwitchADDING DEVICE SITE2 68 CyberSWITCHEXAMPLE NETWORKS Configure SITE1 Workgroup Remote Access SwitchEXAMPLE NETWORKS 70 CyberSWITCHReturn to the Main Menu Press 2 to display the Options Menu ISDN 72 CyberSWITCHEXAMPLE NETWORKS LAN InterfaceCurrent STATIC FINISHING THE SECURITY CONFIGURATIONid Destination AddressEXAMPLE NETWORKS CONFIGURE SITE2CONFIGURING SITE2 OPTIONS SAVE CONFIGURATION FILES CONFIGURING SECURITYVERIFY THE INSTALLATION EXAMPLE NETWORKS 76 CyberSWITCHOn SITE2 Check connectivity to local devices IP PING 128.3.3.4 host Check connectivity to SITE1INITIAL INSTALLATION STEPS IPX ROUTING NETWORKOVERVIEW BUSINESS ASSUMPTIONSmasternet EXAMPLE NETWORKSRESOURCES SYSTEM DETAILSLINES BRI LinesEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationDEVICE INFORMATION Authentication InformationCalling ISDN, FR, etc. Information X.25 InformationEXAMPLE NETWORKS Authentication InformationDEVICE INFORMATION Calling ISDN, FR, etc. InformationBRIDGING AND ROUTING INFORMATION BRIDGING Workgroup Remote Access SwitchIP ROUTING Network Interface InformationNetWare Static Services IPX ROUTINGEXAMPLE NETWORKS IPX Routing InformationCONFIGURE DEVICES CONFIGURE IPX ROUTING MASTERNET DETROITADD IPX WAN DEVICE ISDN InformationIPX Information Authentication Information86 CyberSWITCH EXAMPLE NETWORKSThe bridging options for tampabr should now look like the following CONFIGURE SYSTEM OPTIONS1. From the IPX menu, select IPX Internal Network Number 2. Select IPX RoutingAdd a LAN Interface EXAMPLE NETWORKSThe RIP/SAP menus will appear similar to the following Add a Remote LAN InterfaceFinally, you’ll see this screen 90 CyberSWITCHEXAMPLE NETWORKS ISOLATED MODE CONFIGURE NETWARE STATIC SERVICESIPX STATIC ROUTES ROUTING PROTOCOLSCONFIGURE THE REMOTE DEVICES SAVE CONFIGURATION FILESVERIFY THE INSTALLATION 92 CyberSWITCHOVERVIEW APPLETALK ROUTING NETWORKINITIAL INSTALLATION STEPS ISDN SITE1 AppleTalk ConfigurationEXAMPLE NETWORKS Network RangeLINES System NameRESOURCES EXAMPLE NETWORKS APPLETALK ROUTING45-50 Site2Calling ISDN, FR, etc. Information Authentication InformationX.25 Information Frame Relay InformationCONFIGURING THE OPTIONS CONFIGURE THE CYBERSWITCH98 CyberSWITCH EXAMPLE NETWORKSport type AppleTalk network range EXAMPLE NETWORKSCONFIGURING DEVICE SITE2’S ISDN INFORMATION CONFIGURING DEVICE INFORMATIONEXAMPLE NETWORKS 102 CyberSWITCHCONFIGURING DEVICE SITE2’S APPLETALK INFORMATION CONFIGURING DEVICE SITE2’S AUTHENTICATION INFORMATIONAppleTalk network type This is SITE2’s network type CONFIGURING AN APPLETALK STATIC ROUTEEXAMPLE NETWORKS SAVE CONFIGURATION FILES VERIFY THE INSTALLATIONEXAMPLE NETWORKS INDEX