![](/images/new-backgrounds/1174544/174544199x1.webp)
Troubleshooting
A.1.2 Check Self-Test (Automatically Performed)
During a system boot, the ATM adapter automatically performs a
If the
If the
1.Halt the system, being sure to follow the procedures outlined in Chapter 2 of the User’s Manual for the adapter.
2.Open the computer as shown in Chapter 2 of the User’s Manual for the adapter, and reseat the board.
3.Reboot the system.
If the board still fails after a reseat, then it should be returned for repair. Call Cabletron Systems’ Technical Support for further assistance.
A.1.3 Firmware Download (Automatically Performed)
Before operating as an ATM interface, the firmware is automatically down- loaded from the system RAM to the onboard i960 processor during host sys- tem boot. A message similar to:
If the download is successful, check to see if the hardware has been detected by the driver as described in the next subsection.
If the firmware failed to download, then there is most likely a hardware prob- lem. Call Cabletron Systems’ Technical Support for further assistance.