Hardware Specifications
C.3.9 SBA-200 Technical Specifications
The
| Hardware |
Architecture | |
AAL Support | Special purpose, |
| 3/4 calculations |
|
|
UNI | 100 and 140 Mbps TAXI (4B/5B encoding); |
| 155Mbps |
|
|
Form Factor | |
Compliance | ATM cell processing per ANSI |
| ATM Forum v3.0 UNI specification |
|
|
Cabling | Duplex 62.5/125 ∝m multimode fiber (2 km max. run, 10 dB loss); |
| |
|
|
Connectors | ST and SC Types for multimode fiber; |
Memory | 256 kbytes |
|
|
DMA Support | |
| port; Supports block transfers up to 16 words; Full |
|
|
| Software |
Transparent TCP/IP protocol interface
SPANS Switched Virtual Circuit (SVC) signalling protocol
Permanent Virtual Circuits (PVC), Supports up to 1024 Virtual Circuit Identifiers (VCIs)
Support for UNI 3.0 signalling, ILMI, LAN Emulation Services (SunOS only) and Clients (SunOS and Solaris), Classical IP
SNMP MIB access to adapter status, ATM cell statistics, cell errors, and VCI/VPI information
| General |
Dimensions | 0.5" H x 3.3" W x 5.8" D (1.3 cm x 8.4 cm x 14.7 cm) |
Weight | 6 oz (170 g) |
|
|
Power Requirements | 2A (maximum) @ +5V |
Operating Temperature | 32˚F to 104˚F (0˚C to 40˚C) |
|
|
Operating Humidity | 20% to 80%, |
|
|
Compliance | FCC Part 15, Class A Verification (UTP); FCC Class B Certification |
| |
|