Cabletron Systems SFCS-1000, SFCS-200BX, SFCS-200WG manual Complete Hardware Test

SCP Diagnostics

B.1.2.11 Complete Hardware Test

This series of tests checks the functionality of all of the hardware devices, in the SCP including the FLASH chips and SRAM. It takes about six minutes to run.

NOTE: It is recommended that you back up your CDB before running this test. The chips are saved before testing each one and then restored. However, if a power failure would occur or if the switch were rebooted during the test, some of the data may not be restored properly.

=>test-manufact Clock: OK DRAM: OK Ethernet: OK Timer: OK

}Serial: OK

SRAM: OK

Flash Test

.

.

.

Erase Chip

Pattern 1

Erase Chip

Pattern 2

Erase Chip

Pattern 3

Flash: OK

B-8