Chapter 6 Web Menu (Administrator Mode)

IMPORTANT

•Using the length of the first document page as a reference, the scanner detects a double feed when a subsequent page is longer or shorter than the reference page by 1.38" (35 mm) or more.

•Set [Double feed detection by length] to [OFF] when scanning a document that contains pages of different lengths.

Document orientation

Rotates the scanned image to the specified angle.

Hint

When [Auto] is selected, the scanner detects text orientation within the document and rotates the image so that the orientation of the text is correct.

IMPORTANT

The scanning speed may be reduced when [Auto] is selected.

Deskew

Detects when a document has been fed askew from the scanned image, and then straightens the image.

•Prefer Quality

Image processing is performed to minimize the loss of quality of an image that has deteriorated as result of deskewing.

•Prefer Speed

The image deteriorates slightly as a result of deskewing.

IMPORTANT

If you select [Prefer Quality], the scanning speed is reduced. If you are scanning a large number of pages, select [Prefer Speed] to prevent a decrease in scanning speed.

Bleed-through reduction

Eliminates bleed-through images, in which images on the reverse side of a scanned document appear on the scanned page, such as when scanning thin documents with text or images on both sides.

IMPORTANT

The bleed-through reduction setting is disabled when the scanning mode is set to [Text enhance].

Hint

When using bleed-through reduction, adjust the bleed-through reduction level to match the type of document.

Color drop-out

The color drop-out function has a “drop-out” effect that leaves out a specified color (red, blue, or green) while scanning, and a “color enhancement” effect that emphasizes a specified color.

IMPORTANT

The color drop-out setting is disabled when the scanning mode is set to [Color].

Hint

The OCR recognition rate is sometimes improved by deleting colored ruled lines and other objects with the color drop-out function.

❏Copying Job Buttons

You can copy the settings of a job button and register it as a new job button.

Hint

•Use this function when you want to copy a Shared Job Button and register it as a different job button after changing some of the settings.

•By copying job buttons from User Administration, you can copy job buttons between the Shared Job Button and the My Job Button.

1.Select the job button you want to copy, and click the [Copy] button.

6-26