Canon 300, 300P 54

Chapter 5 Operating Procedures

1. Flow of Scanner Operations

The procedure and screen transitions for the process from turning the scanner ON, to sending an image file are as follows. For descriptions of the various settings, refer to the appropriate reference pages.

Turn the power ON

(See p. 5-3.)

No user is registered

Users are registered (device/server authentication)

* When no user is registered and only

the Shared Address Book and Shared

* Set the screen that appears after login in the user settings.

Job Button are used

(See p. 5-4.)

* When you use server authentication, the user that logged in

is registered automatically.

User Settings screen

Home screen

Job Button screen

(See p. 5-9.)

(See p. 5-8.)

* Users restricted by [Use only Job

Buttons] in the function

restrictions cannot scan from the

Password setting screen

Address selection screen

Home screen.

(See p. 5-9.)

(See p. 5-15.)

Fingerprint registration screen

(See p. 5-10.)

Scan/Delivery Options screen

Scanning starts immediately after a

(See p. 5-27.)

job button is pressed.

* The User Settings screen enables

setting a password for the user that

* Delivery Options

logged in, and registration for the

Scan (The process after scanning differs depending on the Delivery Options)

ScanFront 300P.

settings are also applied

(See p. 5-34.)

to job buttons.

Scanning finishes (A document confirmation message appears)

(See p. 5-19.)

The document and

After scanning of the

image are not checked

document ends, the image is

Send/Image Confirmation screen

sent as is and the process

(See p. 5-20.)

ends.

The image is sent

without the address

Address Confirmation screen

being confirmed.

(See p. 5-21.)

Send (The screen displayed after sending differs depending on the Delivery Options)

(See p. 5-34.)

Home screen

Job Button screen

5-2