Chapter 6 Web Menu (Administrator Mode)

Registering New Users

Click [New User] to register a new user.

IMPORTANT

When using an authentication server (see p. 6-35), users that are logged in from an authentication server account are registered automatically.

If an e-mail address is registered for the authentication server account, the e-mail address is also registered automatically.

If an e-mail address is not registered for the authentication server account, the e-mail address is not registered. Register an e-mail address by editing the user settings (see p. 6-11).

User Settings

Authentication Server: Device

The authentication method for newly registered users is Devic, and user authentication is performed on the ScanFront (device).

Hint

For users logged in from an authentication server account and automatically registered, the authentication method is the domain name of the authentication server.

User name/Password

Enter the user name and password to use for login.

Password (confirmation)

Enter the same password again for confirmation.

Mail Address

Enter the originating address for e-mail sent from the scanner.

IMPORTANT

Users are not permitted to register and change e-mail addresses. Make sure e-mail addresses are registered and changed by the administrator.

If no e-mail address is registered, the administrator’s e-mail address is used as the originating e-mail address. (See “Device Configuration” on p. 6-29.)

SMTP/POP Before SMTP Authentication

Appears when [Auth Method] is configured to any setting other than [SMTP] in the mail server settings (see p. 6-34). Enter the [User name] and [Password] that will be used for mail server authentication here.

IMPORTANT

Confirm the [User name] and [Password] with the user before entering them. Otherwise, have the user enter them directly under [User Settings] of the Web Menu (User Mode) (see

p. 8-5).

Screen after Login

Select the Home screen or the Job Button screen as the first screen to appear after the user logs in.

Home Screen

6-7