Chapter 7 ScanFront Administration Tool

2. Installing ScanFront Administration Tool

❏System Requirements

Install ScanFront Administration Tool on a computer that is connected to the same network as the ScanFront scanners, and that meets the following requirements.

Operating System

●Windows XP (32 bit/64 bit)

●Windows Server 2003 (32 bit/64 bit)

●Windows Vista (32 bit/64 bit)

●Windows Server 2008 (32 bit/64 bit)

●Windows Server 2008 R2

●Windows 7 (32 bit/64 bit)

❏Installation

1.Insert the INSTRUCTIONS AND UTILITIES CD-ROM into the computer.

2.Start the ScanFront Administration Tool installer.

Use Windows Explorer, for example, to locate the installer in the following folder on the CD-ROM, and double-click the installer to start it.

For Windows 7, Windows Vista, or Windows Server 2008:

Q:\AdministrationTool\Vista and 2008Server English\setup.exe (“Q” is the letter assignment for the CD-ROM drive)

For Windows XP or Windows Server 2003:

Q: \AdministrationTool\XP and 2003Server English\setup.exe (“Q” is the letter assignment for the CD-ROM drive)

Hint

An installer for the Japanese version of ScanFront Administration Tool is also stored on the INSTRUCTIONS AND UTILITIES CD-ROM. If necessary, you can install the Japanese version of ScanFront Administration Tool by replacing “English” in the folders mentioned above with “Japanese”.

You can only install one version of the software. Do not install both versions on the same computer.

3.Click [Next].

7-3