Chapter 6 Web Menu (Administrator Mode)

Network Setting

You can confirm the network settings configured under [Administrator setting] on the scanner.

Network Setting

Confirm or change the network settings configured under [Administrator setting] on the scanner.

IMPORTANT

The device name can be a combination of letters (A-Z, a-z), numbers (0-9), and hyphens (-) up to 15 characters long.

The device name must begin with a letter. You cannot end the device name with a hyphen.

You must restart the scanner after changing the device name.

Security of Web Menu

Add a checkmark to always use SSL for communication with the Web Menu.

Hint

If you add a checkmark for [Be sure to use SSL], [Login with SSL] and [Do Not Use SSL] are no longer displayed in the login screen for the Web menu.

When you open the Web Menu using Internet Explorer 7 or later, an SSL-certificate warning will appear. However, you can proceed and open the Web Menu safely.

Language/Timezone

You can confirm or change the language and regional settings that appear on the scanner.

Language on the device

Set the language displayed on the touch panel.

IMPORTANT

You must restart the scanner after changing the display language setting.

Time Zone

Set the region in which the scanner will be used.

Enable daylight saving time

Select this check box to apply the Daylight Saving Time for the specified region set in the Time Zone.

IMPORTANT

If the correct time zone is not set, the time stamps that are saved for the send time of e-mail messages, and for the saved image files will be incorrect.

When the daylight saving time mode is enabled, the correct time may not be reflected. In this case, set the correct time.

6-30