Chapter 1 Before Use

3. Names and Functions of Parts

The names and functions of the parts of the ScanFront 300/300P are shown below.

❏Front and Document Feed and Eject Trays

aTray Extension

Open this to prevent scanned documents from slipping off.

bDocument Eject Tray

Open this tray when using the ScanFront. If scanned documents curl in the document eject tray, remove the entire tray. (See p. 2-4.)

cPanel Unit

dTouch Panel

Touch this screen to operate the ScanFront.

eLock Lever

Locks the panel unit. Pull the lever toward you to unlock the panel unit. (See p. 2-10.)

fDocument Guides

Adjust these to match the width of the document. (See p. 2-6.)

gDocument Feed Tray

Place documents here. (See p. 2-4.)

hUSB Port (Front)

Connect a USB1.1/Hi-Speed USB2.0 compatible USB memory device, USB keyboard, or USB mouse.

iPower Switch

Use this to turn the power ON. (See p. 3-4.)

*Use the Power OFF button on the touch panel to turn the power OFF.

jFeed Selection Lever

Use this lever to change the feed method for documents. (See p. 2-5.)

kPower Indicator

Lights when the power is ON. (See p. 3-4.)

lFingerprint Authentication Sensor (Only Available with the ScanFront 300P)

This fingerprint sensor is for fingerprint registration and authentication. (See p. 2-11.)

Open this when there is a paper jam or to perform maintenance. (See p. 2-10.)

1-8