Canon C75 Stop, Start, When you hear the fax call ring pattern:, When you hear the telephone call ring pattern:

10 Press Stop to return to standby mode.	Ex:
		15:00	NET SW.

nWhen the RX MODE setting is set to NET SWITCH, no other receive mode can be selected with the Receive Mode button.

Network Switch System Operation

The procedure for using the network switch system is almost the same as when using the unit over a normal telephone line. When you receive calls, however, the unit will respond slightly differently as described below:

When you hear the telephone call ring pattern:

Pick up the handset and talk normally. If you hear a slow beep, it means the call is from a fax machine trying to send a fax. Press Start to receive the fax. If you do not pick up the handset, the unit continues to ring until the other party hangs up. If an answering machine is connected, it takes over the call.

When you hear the fax call ring pattern:

After the unit rings, it receives the document automatically.

8-18 Receiving Faxes Chapter 8