Appendix

 

 

About the Lithium

Use a lithium coin cell battery CR2025. If you use an incorrect one, an explosion may occur.

Coin Cell Battery

Discard used batteries according to the local laws and regulations.

CR2025

Do not heat or throw the battery into a fire or soak it into water. It may cause fire or personal

 

injury due to a battery explosion or liquid leakage.

 

 

 

Do not disassemble, modify, or heat a battery. It may cause personal injury due to liquid

 

leakage. If battery leakage occurs, thoroughly wash the affected skin and clothes. Keep

 

battery acid away from your eyes and mouth.

 

 

 

Keep a battery away from children. If your child swallows the battery, contact your doctor

 

immediately. It may cause severe damage to stomach and intestinal tissue.

 

 

 

Before you discard a battery, cover the terminals with tape or other insulators to prevent

 

direct contact with other objects. Contact with the metallic components of other materials in

 

waste containers may lead to fire or explosions.

 

 

Caution

You may cause injury or damage the printer if you ignore any of these safety precautions.

Choosing a location

Do not install the printer in a location that is unstable or subject to excessive vibration.

 

Do not install the printer in locations that are very humid or dusty, in direct sunlight,

 

outdoors, or close to a heating source.

 

To avoid the risk of fire or electric shocks, install the printer in a location with an ambient

 

temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation

 

free).

 

Do not place the printer on a thick rug or carpet.

Power supply

Ensure that the area around the power outlet is kept clear at all times

 

so you can easily unplug the power cord if necessary.

 

Never remove the plug by pulling on the cord.

Do not use an extension lead/ cord.

 

Never use a power supply source other than the one rated for the printer in the country where

 

you purchased the printer.

 

AC 110-120 V, 50/60 Hz

 

AC 220-240 V, 50/60 Hz

 

 

Working around the

Never put your hands or fingers in the printer while it is printing.

printer

 

Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents

 

(alcohol, thinners, etc.) on top of the printer.

 

 

 

If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for

 

service.

 

 

Print heads and ink

For safety reasons store print heads and ink tanks out of the reach of small children.

tanks

If a child ingests any ink, consult a doctor immediately.

 

 

 

Do not shake print heads or ink tanks.

 

Ink may leak out and stain clothing or the surrounding area.

79

Page 81
Image 81
Canon DS700 manual Appendix