Canon MF5770, MF5750 manual Adjusting the TX Report Setting, Adjusting the Activity Report Setting

Adjusting the ACTIVITY REPORT Setting

You can set the machine to turn on or off automatic printing of the ACTIVITY REPORT.

1 Press [Menu].

2 Press [ (-)] or [ (+)] to select <FAX SETTINGS> ➞ press [OK].

3 Press [ (-)] or [ (+)] to select <REPORT SETTINGS> ➞ press [OK].

4 Press [ (-)] or [ (+)] to select <ACTIVITY REPORT> ➞ press [OK].

5 Press [ (-)] or [ (+)] to select the setting you want ➞ press [OK].

You can select from the following:

-<OUTPUT YES> to turn on automatic printing of the ACTIVITY REPORT

-<OUTPUT NO> to turn off automatic printing of the ACTIVITY REPORT

6 Press [Stop/Reset] to return to the standby display.

Adjusting the TX REPORT Setting

The machine can print a TX (transmission) report (TX REPORT or ERROR TX REPORT) after sending a document. You can set it to print every time it sends a document, or only when an error occurs. Alternatively, you can disable printing the report. By default, the machine is set to print a TX report only when an error occurs.

■TX REPORT

01/02 2005 17:52 FAX 1234567 CANON 001

*********************

***	T X R E P O RT ***
*********************
TRANSMISSION OK
TX/RX NO	0004
RECIPIENT ADDRESS	1 432 2060
DESTINATION ID
ST. TIME	01/02 17:52
TIME USE	00' 11
PAGES SENT	1
RESULT	OK

6

Reports and Lists

6-3