Canon MF5770, MF5750 manual Adjusting the RX Report Setting, OK Reception successful

Adjusting the RX REPORT Setting

The machine can print an RX (reception) report after receiving a document. You can set it to print every time it receives a document, or only when an error occurs. Alternatively, you can disable printing the report. By default, the machine is set not to print an RX REPORT.

01/02 2005 17:52 FAX 1234567 CANON 001

					*********************
					***			RX REPORT ***
					*********************
Description				RECEPTION OK
				TX/RX NO				5003
				RECIPIENT ADDRESS				905 795 1111
				DESTINATION ID
				ST. TIME				01/02 17:52
				TIME USE				00' 1 4
				PGS.				1
				RESULT				OK
OK: Reception successful							Transaction number
NG: Some or no pages received						Senders fax/telephone number
Number of pages received.					Registered name for speed dial
If reception was not complete, it					(not mentioned on the RX report)
indicates the number of page being
received when an error occurred.
Reception duration
Reception time
1	Press [Menu].
2	Press [	(-)] or [	(+)] to select <FAX SETTINGS> ➞ press [OK].
3	Press [	(-)] or [	(+)] to select <REPORT SETTINGS> ➞ press [OK].
4	Press [	(-)] or [	(+)] to select <RX REPORT> ➞ press [OK].
5	Press [	(-)] or [	(+)] to select the setting you want ➞ press [OK].

You can select from the following:

-<OUTPUT NO> to disable printing the report

-<PRINT ERROR ONLY> to print a report only when a reception error occurs

-<OUTPUT YES> to print a report every time you receive a document

6 Press [Stop/Reset] to return to the standby display.

6

Reports and Lists

6-5