LCD Cannot Be Seen At All or Is Hard to See

Cause

Action

The display on the LCD is hard to see.

If the contrast of the LCD is too strong or too weak, adjust it in the Adjust

 

contrast menu in the Maintenance/settings. Refer to “Changing the Machine

 

Settings” in the User’s Guide on-screen manual.

The machine is not powered on or the

z If the Power lamp is off

LCD is in the screen-saver mode.

The machine is not powered on. Connect the power cord and press the ON/

 

 

OFF button. The machine will power on and the LCD will display a message.

 

z If the Power lamp is lit

 

The LCD may be in the screen-saver mode. On the Operation Panel, press a

 

button other than the ON/OFF button.

An Unintended Language Is Displayed on the LCD

Cause

Action

The language you want to be displayed

Select the language according to the following procedure.

is not selected.

(1)Press the COPY button, wait for about 5 seconds, and then press the MENU

 

button.

 

(2)Press the ] button twice, then press the OK button.

 

(3)Press the ] button once, then press the OK button.

 

(4)Press the } button five times, then press the OK button.

 

(5)Press the { or } button to select the language you want to be displayed,

 

then press the OK button.

104Troubleshooting