zRedialing
There are two methods of redialing: Manual redialing and Automatic redialing. Automatic redialing is enabled by default.
zAutomatic Redialing
When using memory sending to send a document and the recipient’s line is busy, the machine will redial the number after a specified interval.
You can customize the following automatic redialing settings:
•Whether or not your machine redials automatically
•The number of times the machine redials (1 to 10 times)
•The time interval between redials (1 to 99 minutes)
To change the automatic redialing settings, change the Auto redial settings in TX settings under the FAX settings screen.
Note
zThe range of values you can set for the automatic redialing settings varies depending on the country or region of purchase.
zTo cancel automatic redialing while redialing is in progress, press the Stop/Reset button and follow the instructions on the LCD.
zTo cancel automatic redialing when redialing is standing by, delete the unsent document from the machine’s memory. For details, see “Deleting a Document in Memory” on page 75.
zManual Redialing
To redial the fax number last dialed with the Numeric buttons, press the Redial/Pause button.
Note
zFor details on sending faxes, see “Sending Faxes (Memory Sending)” on page 61.
zTo cancel manual redialing, press the Stop/Reset button.
Using Other Useful Sending Functions
Sending from Your Computer (Windows Only)
If your machine is connected to a computer, you can send faxes using the fax driver from any application software that has a printing function. For details, refer to the FAX Driver Guide on- screen manual.
Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically corrects errors caused by connection troubles,
Note
zIf the sender’s or receiver’s fax is not
zYou can disable ECM sending/receiving. Refer to “ECM TX” and “ECM RX” in “Device Settings” of the User’s Guide
zTransmission may take longer when ECM is enabled.
64Faxing