Error Message On | Action |
|
PictBridge Compliant |
| |
Device |
|
|
“Printer error” | An error requiring servicing may have occurred. (Machine Power lamp flashes |
|
| green and Alarm lamp flashes orange alternately.) |
|
| Disconnect the USB cable between the machine and the PictBridge compliant |
|
| device, turn off the machine, and unplug the power cord of the machine from the |
|
| power supply. After a while, plug the power cord of the machine back in, turn on |
|
| the machine, and then reconnect the PictBridge compliant device to the |
|
| machine. |
|
| If the same error occurs, contact your Canon service representative. |
|
Cannot Remove a Memory Card |
| |
|
|
|
Cause | Action | |
miniSD Card, microSD Card, xD- | Contact your Canon service representative. | |
Picture Card, Memory Stick Duo, | Important | |
Memory Stick PRO Duo, or | ||
inserted into the machine without | Never attempt to remove a memory card using a thin stick or tweezers. Doing | |
attaching to the special adapter. | ||
so may damage the machine. | ||
|
Scanning Problems
ScanGear Won’t Start
Cause | Action |
The scanner driver (ScanGear) is not | Follow the procedure described in your setup sheet or the Network Setup Guide |
installed. | to reinstall the MP Drivers. |
Other Scanning Troubles
Refer to the Scanning Guide
Troubleshooting 121