*4 | Feeding this paper from the Front Tray can damage the machine. Load in the Rear Tray. |
*5 | When loading paper in stacks, the print side may be marked as it is fed in or sheets may be |
| stuck to one another causing them not to be fed properly. In this case, load one sheet at a |
| time. |
*6 | We recommend that you remove the previously printed sheet from the Paper Output Tray |
| before continuously printing to avoid blurs and discoloration. |
*7 | This paper cannot be used in Macintosh®. |
*8 | When copying onto sticker paper, be sure to select Sticker Copy in the Copy mode. Refer to |
| “Copying on Stickers (Sticker Copy)” in “Using Useful Copy Functions” of the User’s Guide |
When printing photos saved in a memory card to sticker paper, be sure to select Sticker print in the Memory card mode. Refer to “Printing on Stickers (Sticker Print)” in “Using Other Useful Printing Functions” of the User’s Guide
Important
zPut unused paper back into the package, and store them avoiding heat, humidity, and direct sunlight.
zDo not touch the printed surface nor stack the printed sheets until the ink is fixed.
Note
For a detailed description of printing media types, refer to “Printing Media” in the User’s Guide on- screen manual.
zMedia Types You Cannot Use
Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the machine to jam or malfunction. Additionally, when printing on A5 or smaller sized paper, do not use paper thinner than a post card, including plain paper or notepad paper cut to a small size.
zFolded, curled, or wrinkled paper
zDamp paper
zPaper that is too thin (weighing less than 17 lb / 64 gsm)
zPaper that is too thick (plain paper, except for Canon genuine paper, weighing more than 28 lb / 105 gsm)
zPicture postcards
zPostcards affixed with photos or stickers
zAny type of paper with holes
zPaper that is not rectangular
zPaper bound with staples or glue
zPaper with adhesives
zPaper decorated with glitter, etc.
12Before Using the Machine