Canon W7200, W7250 manual Loading the Roll Media, Press Paper Source to light the Roll Media lamp

2 Press Paper Source to light the Roll Media lamp.

	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿ ￿￿￿￿￿￿￿	￿￿￿￿￿
Pressing Paper Source alternates the selection between Roll Media and Cut
Sheet.
	￿￿￿￿￿￿	￿￿￿￿￿	￿￿￿￿￿￿

Loading the Roll Media

Follow the procedure below to set the roll media in the roll media tray. If there are any cut sheets or other paper output in the tray, remove them first.

Caution

Note

zIf the W7250 is being used without the stand, to avoid tipping the printer over and damaging it or causing personal injury, never press down or lean on the roll media tray while it is pulled out of the printer.

zBefore changing to a larger media size, open the upper cover and clean the interior of the printer to ensure that the entire platen is clean. (Æ P.6-11)

zFor more details about the type of roll media that can be loaded in the printer, refer to Chapter 2 “Print Media That Can Be Used”. (Æ P.2-2)

2-8

Print Media You Can Use