Using the Operation Panel
12
5-12
CutDustReduction
Plain Paper
Coated Paper
Heavy Coated
Glossy Paper
Photo Glossy
Semi-Glossy
Glossy Film
Back Print Film
Proof
Special 1~5
Off*, On
When printing on roll media, prints a
line at the cutting position in order to
reduce the amount of dust and cut
waste. This setting can be adjusted for
each type of media.
Ink Check Off
Bk Ink Tank
PC Ink Tank
C Ink Tank
PM Ink Tank
M Ink Tank
Y Ink Tank
Switches off the ink level detection
function.
Language English*, , Francais,
Deutsch, Italiano, Espanol
Allows you to select the display
language.
Test Pr int
Status Print — Prints a complete list of all printer
settings.
Nozzle Check — Prints the nozzle check pattern.
Information
Ink — Displays the amount of ink supply
remaining.
Vers i o n — Displays the version numbers for the
printer unit and the firmware.
RAM — Displays the memory capacity of the
printer.
Interface — Displays the names of the interfaces
that can be used.
Ext. Interface — Displays the name of the interface that
can be used at the expansion slot.
MAC Address — Displays the MAC address assigned
to the computer.
Error — Displays the most recent error
message.
*1.Displayed only when “Ro ll Media” selected as the Media Source and “Cutter”
is enabled.
*2.Displayed onl y when “Enable” is selected for “Take-up Reel”.
*3.W7200 only.
*4.Displayed onl y when “Cut Sheet” is selected as the Media Source.
*5.Displayed onl y when “Roll Media” is selected as the Media Source.
*6.W7250 only.
Menu Item Available Settings Function