6 Insert the holder stopper completely into the left end of the roll holder until it stops.

The roll media is locked in place by the roll holder.

7 Position the roll media as shown in the illustration, align the left and right ends of the roll holder with the grooves at either end of the roll media tray, then set the roll media in the tray.

If the roll media has unrolled, turn the roll as you set it.

Important

zWhen holding the roll holder, grip it by the ring. To avoid personal injury, do not hold it by the shaft.

zWhile holding the roll holder, avoid touching the media anywhere other than the leading edge of the media. If you touch the surface of the media on the print side, this could cause poor printing.

Loading Roll Media

2-11

Page 37
Image 37
Canon W7250, W7200 manual Roll media is locked in place by the roll holder